凯斯®漂毛剂BLANKIT
说 明:
由北京恒普科技有限责任公司与全球知名科研机构India Chemical Technology Laboratory及Federal Institute of Chemical Technology合作开发,于2012年正式推出的毛皮专用漂白产品该产品漂白性能远超市场其他同类产品不含荧光增白剂。
成 分:
含络合剂和pH缓冲剂、经稳定化处理还原漂白剂。可生物降解,不含磷。
外 观:
白色结晶粉末
溶 解 性:
易溶于水
用 途:
适用于各种天然羽毛、有色毛皮的褪色漂白,尤其是羊皮。
特 点:
漂白效率极强,白度高,白度稳定,不会损伤纤维。能结合铁离子和重金
属离子,即使在水质较差条件中,羊毛仍可保持柔软手感。通过还原纤维
上的有色组份,使之褪色并溶于水中而达到漂白的目的。
包 装:
编织袋 25千克/袋
保 存:
在5~35℃条件下保质期6个月。
储运条件:
使用之后要扎紧内袋,以免受潮,储存于阴凉通风处。防冻、防暴晒。属
非危险化学品,本产品仅限于工业用途。
温馨提示
本公司提供的各种资料是根据本公司现有知识及使用经验编写的,供广大用户在使用时参考。由于加工过程中存在许多影响因素,当使用本公司产品时,用户有责任预先进行试验。本公司仅保证出厂产品其品质稳定不变。使用本公司产品时,应遵守本公司安全资料中的建议和注意事项,处置化学品时,应小心采取相应的安全防护措施。本文件版权由北京恒普科技有限责任公司所有,如需转载,请注明版权。
KAISI BLEACHING AGENT FOR WOOL BLANKIT
INTRODUCTION: Beijing Hengpu science and technology limited liability company with world-renowned research institutions India Chemical Technology Laboratory and Federal Institute of Chemical Technology to develop, fur special bleaching products launched in 2012 the bleaching performance far exceeding market other similar products do not contain fluorescent whitening agent.
DEscriptION: Containing complexing agent and pH buffer, the stabilizing
treatment of reductive bleaching agent. Biodegradable, does
not contain phosphorus.
Appearance:White crystal powde
Solubility:In water
APPLICATION: Apply to all kinds of natural colored fur fade bleaching,especially
the skin.
CHARACTERISTICS: Bleaching efficiency is extremely strong, white degree is
high, the white degreeof stability, will not damage fiber. Can be
combined with iron ions and heavy metal ions, even in the
condition of water quality is poorer, wool still can keep the soft
feel. Through reduction of fiber on the colored components, and
make it fade and achieve the purpose of bleaching and soluble
in water.
PACKING: Woven bags of 25 kg/bag
STORAGE: At 5~35℃ and shelf-life of 6 months.After use to tie the bag, to
avoid damp, stored in a cool ventilated place. Anti freeze, anti
riot sun. Is a non hazardous chemicals, this product is limited to
industrial use.
Warm /eval/i
Our company provides all kinds of information is written according to the company's existing knowledge and experience with, for the vast number of users in the use of reference. Because there are many influence factors in the process of machining, when using the company's products, the user has the responsibility to test in advance. The company only to ensure the quality of its products are stable. When using the company's products shall comply with the advice and matters needing attention in the company safety data, disposal of chemicals, take corresponding safety protection measures should be careful. This file copyright owned by Beijing hengpu technology co., LTD., if you want to reprint, please indicate the copyright.